The CHR15 is a 2-way loudspeaker, equipped with a 15-inch woofer and a 1.4-inch HF driver, and perfect for use as a main speaker. Combining carefully selected and customized transducers with the same plywood construction found on Yamaha’s high-end CZR Series, the CHR15 offers best-in-class sound quality and durability. Featuring a plywood cabinet that delivers a clear sound with minimal vibration Plywood enclosure with a polyurea coating for a robust, scratch resistant surface Compact size despite the 15-inch LF driver that provides excellent low frequency response Dual-angle pole sockets offer both 0° or a -7° down tilt Rigging points for use with eye bolts Yamaha DSP equipped amplifiers or other compatible signal processors have dedicated speaker processor tuning settings to maximize system performance       CHR15     General specifications     Speaker type 2-way Speaker, Bass-reflex Frequency range (-10dB) 49 Hz - 20 kHz Coverage area H90ﾟ x V60ﾟ Crossover 2.0 kHz Nominal impedance 8 Ω SPL Sensitivity (1W; 1m on axis) 95 dB SPL Peak (Calculated) 125 dB SPL Components LF Diameter: 15'' cone, Voice Coil: 2.5'', Magnet: Ferrite HF Diaphragm: 1.4'', Type: 1'' throat compression driver, Magnet: Ferrite Power rating NOISE 250 W PGM 500 W PEAK 1,000 W I/O connectors SpeakON NL4MP x 2 (Parallel) Cabinet material Plywood Finish Durable Polyurea Painting, Black Handle Side x2 Pole socket Φ35 mm x2 (Bottom, 0° or -7°) Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts) Floor Monitor Angle - Dimensions W 432 mm (17.0'') H 692 mm (27.2'') (with rubber feet) D 405 mm (15.9'') Net weight 22.0 kg (48.5 lbs) Options - read more

 With LED Backlit Buttons • AM or FM BAND • Automatic and Manual Tuning • RDS Function • Radio Memory Function of 30 presets : FM 1 x 10 / FM 2 x 10 / AM x 10 • Comes with : AM Antenna Set x 1   - FM Antenna Wire x 1   - AV Wire x 1   - AC Power Cord x 1   - Remote Controller x 1 Datasheet MF-1000 Datasheet [PDF] Power Requirements 240V AC / 50Hz or 13.2VDC Power Consumption 45W FM-TUNER SPECIFICATIONS   Tuning Range(RDS) 87.5MHz ~ 108MHz 30dB Quietine Sensitivity 28dB S/N Ratio at 1mV/m INPUT 46dB T.H.D at 1mV Input 0.5% Auto Tuning Sens.(97.9MHz) 28dB ~ 35dB Output Max 2dB ±1.3V AM-TUNER SPECIFICATIONS   Tuning Range 522KHz ~ 1611KHz 20dB Quietine Sensitivity 58dB S/N Ratio at 5mV/m INPUT 40dB T.H.D at 1mV Input 0.5% Auto Tuning Sens.(981KHz) 55dB ~ 85dB Output Max.(1KHz) 2dB ±1.3V SPECIFICATION OF AUX IN   AUX IN TYPE Stereo AUX IN & OUTPUT 1:1 DIMENSIONS 483 (W) X 44(H) X 215 (D) mm   read more

• MultiBit D/A Converter • 5-Disc Carrousel Type • 8 Times Oversampling • L/R Stereo Output / Optical Digital Output • Programmable Memory (32) • Music Calendar (14) • Play 1 Exchange • Random Play (14 / Program / All) • Repeat (1 / All / Folder) • A-B Repeat (Via Remote) • Intro Scan (Via Remote) • Auto Power Save • USB Host MP3/WMA • Supports CD-DA / CD-R /CD-RW discs • Supports Disc Playback of PCM / MP3 /WMA • Elapsed / Remaining Time Button • Headphone Output Jack • Multi-Function Fluorescent Display • Display Off / Dimmer • Remote Control / Digi-Link II/III   Datasheet CDC-5506 Datasheet [PDF] Frequency Response 20Hz-20kHz, /-0.8dB S/N Ratio 94dB Dynamic Range 86dB HD, 1kHz 0.009% Wow and Flutter Quartz Crystal Precision Audio Output Level 2 V RMS Dimensions 440mm W x 112mm H x 397mm Weight 5.6kg     read more

CM-800 is a desktop microphone for announcements equipped with a chime tone generator. CM-800 uses a gooseneck and a condenser capsule.  A red ring lights up when the microphone is on. When the talk button is pushed a musical chime tone is played before talking. When it is switched off a chime tone is also played informing about the end of the announcement. The speech and the chime volume can be set individually with button on the rear panel. CM-800 is equipped with one unbalanced input and one balanced XLR and one unbalanced 6.3 mm jack outputs. Made of die cast aluminium mainly, CM-800 is robust and can be installed in areas with intensive use like transport stations, schools, canteens, supermarkets, etc.   MODELCM-800 Power Supply240V/50Hz, DC 15V 400mA230V/60Hz, DC 15V 500mA115V/50Hz, DC 15V 400mA Power Consumption60W (AC) - 45W (DC 12V) 4 Chime Tones400, 554, 659, 880Hz MicrophoneCondenser Microphone Unbalanced Output100mV 10mV Balanced Output230mV 10mV ColorWhite ControlsVolume x 2 Dimension (W x D x H)132 x 155 x 380 mm (5.2’’ x .6.1’’ x 15’’) Weight0.8 kg (1.82 lbs) read more

The TA-1121 is a P.A. amplifier specifically designed for commercial applications. It is an ideal solution for bars, restaurants, retail outlets, office building, and other applications where paging and background music are required. It combines a 120 W amplifier with a five inputs mixer; it is a versatile and easy operating paging system. Mono inputs are available on combo balanced XLR /TRS 6.35 mm jacks. A switch on each input selects a line or microphone level with a 24 V phantom power option. A priority mode is attributed to MIC1 input with a mute depth control. An insert out/in is available to connect signal processing devices, like EQs or anti-feedback systems. The output section accepts 70/100 V constant voltage line and 8 Ω impedance loads. The TA-1121 can also operate with a 24 V DC power supply.   MODEL TA-1121 Power (RMS) 120W Frequency Response 80Hz - 15kHz  ± 3 dB (MIC) 40Hz - 18kHz  ± 3 dB (MIC) Power Supply AC:115V ~ 230V 50/60Hz switching - DC: 24V Input / Sensitivity MIC 1~4: (Combo jack) balanced 2mV (-55dB) AUX :       (RCA) Unbalanced 100mV (-18dB) – CD 300mV (-10dB) LINE :      Unbalanced 100mV (-18dB) AMP IN :  (RCA) 0dB / 1V THD <1% S/N ratio MIC 1~4  > 65 dB AUX  > 75 dB AMP IN  > 80 dB Outputs 8Ω - 25 /70 /100V Controls Volume x 5, Bass, Treble, Master Dimension (W x D x H) 430 x 262 x 88 mm (16.9’’ x .10.3’’ x 3.5’’) Weight 10 kg (20.05 lbs)   read more